|
|
|
|
|
|
|
|
|
|
|
|
|
Crown Heritage Tapered Baluster - 5016 Series
The Crown Heritage 5016 baluster gives your stairs an elegant look with its round, tapered
sides and square bottom. Made from fir, this tapered wooden staircase baluster is strong
enough to provide long lasting support. The 5016 series wood baluster is available in 6
lengths: 31, 34, 36, 39, 42 and 45 inches. The tapered section accounts for about ¾ of the
total length of this piece. A pin on the bottom of the spindle makes it easy to install.
When you order a 5016 wood baluster replacement, you will receive it primed and ready for a
coat of paint. This baluster is not water resistant, and is intended for indoor use only.
|
Simple Wooden Staircase Balusters - 5060 Series
If you’re looking for simple wooden staircase balusters, consider using 5060 series wooden spindles from Stair Parts Pros. You can match these to almost any staircase, because we offer these spindles in several woods, including beech, hemlock, maple, poplar, red oak and white oak. We also offer primed 5060 wood square balusters that are ready to be painted to match or complement your staircase.
We offer 5060 wooden square spindles in 36 and 42 inch lengths. Both sizes of spindles measure 1 ¼ by 1 ¼ inches. Building an entire staircase railing? If you order over 150 lbs. of these balusters, they will be shipped by freight.
|
3101: Hollow Single Twist Baluster. 12mm Square. For Solid version, see 1101 Single Twist Baluster.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5891: Colonial Pin Top Baluster. Available in 34", 36", 39", and 42".
|
5892: Pin Top Baluster. Available in 34", 36", 39", and 42".
|
5894: Pin Top Baluster. Available in 34", 36", 39", and 42".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8075: Riser. 3/4" thick x 7.5" high.
|
3600: Hollow Plain Round Bar Baluster. 12mm. 44" long
|
3700: Hollow Plain Square Bar Baluster. 12mm Square. For Solid version, see 1700 Solid Plain Square Bar Baluster.
Add-on Knuckle available separately as: 3831 12mm Knuckle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3121: Hollow Double Twist Baluster with Single Basket. 12mm Square. For Solid version, see 1121.
|
5360: 1 3/4" Square Baluster. Available in 36" and 42".
|
5010 Tapered Wood Baluster
The Crown Heritage 5010 baluster has a simple shape that looks elegant without being too
modern. It has a 1 ½ inch base that tapers gently to a standard point. While the manufacturer
says the tapered Crown Heritage stair baluster is colonial style, it fits into almost any stair
design.
The 5010 tapered wood baluster is available in 36, 39 and 42 inch lengths. Note that this is
the total length of this tapered wooden baluster for staircases, including the pin. Once
installed, the post will be ½ inch shorter. We offer the 5010 in beech and red oak. You can
also get a primed version ready to be painted to match the rest of your staircase.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3122: Hollow Single Twist Baluster with Double Basket. 12mm Square. For Solid version, see 1122.
|
5061: 1 1/4" Eased Edge Square Baluster. Available in 36" and 42".
|
5361: 1 3/4" Eased Edge Square Baluster. Available in 36" and 42".
|
|
|
|
|
|
|
|
|
|
|
|
C8075 Stair Riser Boards
Riser boards are frequently bumped and kicked as people go up and down stairs, making them as susceptible to damage as the treads. With C8075 stair risers, you can perfectly match your staircase’s current wood surface, and it’s simple to install replacements without redoing every panel. These riser boards for stairs come in your choice of red oak and white oak. Since they come in common sizes, they’re also great for converting a painted staircase into something that looks more natural.
These wood stair risers are 3/4 inches thick and 8 inches high. You can order these replacement staircase risers in 36-, 42-, 48-, 54-, 60- and 72-inch pre-cut lengths.
|
|
|
